Installing a Compact Switch
1. Item is orderable.
Mounting the Switch
The following table explains the different mounting options supported by C9200CX compact switches.
Table 4: Mounting Options
Mounting Method
Wall mount
Rack mount
Shelf or top/bottom of a desk mount
Din rail mount
Mounting on a Desk or Shelf Without Mounting Screws
Procedure
Step 1
Locate the adhesive strip with the rubber feet in the accessory kit.
Step 2
Remove the four rubber feet from the adhesive strip, and attach them to the locations indicated at the bottom
of the unit. This prevents the switch from sliding on the desk or shelf.
Accessories Used
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
•
Mounting using the Mounting Tray and Screws
•
Mounting using the Mounting Tray and Magnet
•
Mounting the Switch Using Rack Mount
Brackets
•
Mounting Under a Desk or a Shelf
•
Mounting using the Mounting Tray and Magnet
•
Mounting the Switch on a DIN Rail
Mounting the Switch
23