Cisco Catalyst 9200CX Compact Series Hardware Installation Manual page 33

Installing a Compact Switch
• Three 8-18 Phillips pan-head screws
• Two 10-32 Phillips pan-head screws
• Screwdriver
Procedure
Step 1 Place the mounting tray on to the mounting surface.
Step 2
Use a 0.144-in. (3.7 mm) or a #27 drill bit to drill holes three 1/2-inches (12.7 mm) deep in the desk.
Step 3 Insert the three 8-18 Phillips pan-head screws in to the slots on the mounting tray, and tighten them.
Figure 5: Attaching the Mounting Tray to the Desk or Shelf
1
2
Step 4
Place the switch on the mounting tray, slide it slightly forward so that the mounting tray hooks on both the
sides engage with the switch.
Three 8-18 Phillips 3
pan-head screws
Mounting tray -
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
Mounting using the Mounting Tray and Screws
Desk
-
25