Wall Mounting A Switch - Cisco CBS Series Get To Know

Get To Know Your Switch
Due to design differences, some of the mounting brackets will attach such that the switch will protrude about
an inch from the mounting surface.
Supplied rack mounting for switch models with front mounting position. The mounting ears sit flush to the
front panel.

Wall Mounting a Switch

You can mount the switches on a wall, using wall studs or to a firmly attached plywood mounting backboard.
Caution
Caution
To wall-mount a 24-port switch using brackets:
Read these instructions carefully before beginning installation. Failure to use the correct hardware or to
follow the correct procedures could result in a hazardous situation to people and damage to the system.
Do not wall-mount the switch with its front panel facing up. Following safety regulations, wall mount
the switch with its front panel facing down or to the side to prevent airflow restriction and to provide
easier access to the cables.
Wall Mounting a Switch
Get To Know Your Switch
3