Cisco Catalyst 9200CX Compact Series Hardware Installation Manual page 18

Safety Warnings
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
Statement 1006
Warning Class 1 laser product. Statement 1008
Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Warning Use copper conductors only. Statement 1025
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum
recommended ambient temperature of: <113°F (45°C). Statement 1047
Cisco Catalyst 9200CX Compact Series Switches Hardware Installation Guide
10
heaviest component at the bottom of the rack.
the unit in the rack.
Preparing for Installation