Mounting The Switch In A Rack - Cisco Catalyst 9500 Series Hardware Installation Manual

Installing a Switch

Mounting the Switch in a Rack

Procedure
Step 1 Use the black Phillips machine screw to attach the cable guide to the left or right bracket.
Figure 19: Attaching the Cable Guide
1
2
Step 2 Secure the switch to the rack rails using the Number-12 or number-10 Phillips machine screws provided with
the accessory kit.
19-inch bracket
Phillips machine screws
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
3 Cable guide
4 M4.0x20mm Phillips pan-head screws (Black
color)
Mounting the Switch in a Rack
43