Switches, Jumpers And Led - gefran SIEIDrive ADV200 DC Series Quick Start Up Manual

+24V
lized and with a maximum ±10% tolerance. The maximum absorption is 1A.
It is not suitable to power supply the regulation card only through a unique rectifi er and
Caution
capacitive fi lter.
La tension de + 24Vdc utilisée pour alimenter extérieurement la carte de régulation doit être
stabiliséeet avec une tolérance de ±10% ; absorption maximum de 1A. Les alimentations
obtenues avec les seules redresseur e fi ltre capacitive ne sont pas appropriées.

5.2.4 Switches, jumpers and LED

Switch V/I settings on inputs and analog output
Analog input 1
S1
Default = voltage (
Analog input 2
S2
Default = voltage (
Analog output 2
S3
Default = voltage (
Jumpers
HC0
Reserved. Deafult = Open
HC1
Open = 400 Vac rated voltage (default)
CFG
Closed = 460 Vac rated voltage
44
voltage, which is used to externally supply the regulation card has to be stabi-
DC
Jumpers :
Switches :
S1
±10 V)
±10 V)
±10 V)
Function
ADV200 • Quick start up guide - Specification and installation
HC0
HC1
CFG
LEDs :
S1
V I
S2 S3
LEDs
PWM
LED lit during IGBT modulation
(green)
Flashes (freq. 1 sec) if no errors or faults
RUN have occurred.
(green) If ON or OFF, indicates an error conditions
(software hangup)
PWR ON when the regulation card is correctly
(green) powered
PWM
RUN
PWR
S2 S3
V I V
Function
I