Table of Contents
Advertisement
Hardware Setup
Congratulations on your purchase of SY-6IEB Mainboard. You are
about to install and connect your new mainboard.
Note: Do not unpack the mainboard from its protective anti-static
packaging until you have made the following preparations.
2-1 PREPARATIONS
Gather and prepare all the following hardware equipment to
complete the installation successfully:
1.
Pentium
fan (boxed type).
Note: This mainboard supports non-boxed type CPUs. The
heavier CPU cooling fan requires the installation of a CPU
support stand included in the mainboard package.
2.
DIMM memory module
3.
Computer case and chassis with adequate power supply unit
4.
Monitor
5.
PS/2 Keyboard
6.
Pointing Device (PS/2 mouse)
7.
Speaker(s) (optional)
8.
Disk Drives: HDD, CD-ROM, Floppy drive ...
9.
External Peripherals: Printer, Plotter, and Modem (optional)
10.
Internal Peripherals: Modem and LAN cards (optional)
Chapter 2
HARDWARE SETUP
®
II or Celeron ™ processor with built-in CPU cooling
6
SY-6IEB
Advertisement
Table of Contents
Need help?
Do you have a question about the SY-6IEB and is the answer not in the manual?