SOYO SY-6IEB User's Manual & Technical Reference page 31

Hardware Setup
menu combines the main parameters that you need to configure, all
in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will display on screen. Follow these steps to configure the CPU
settings.
1. Select [LOAD SETUP DEFAULT]
Select the "LOAD SETUP DEFAULT" menu and type "Y" at the
prompt to load the BIOS optimal setup.
2. Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Speed] field to set the CPU working
frequency, as shown in the following display.
CPU Speed
CPU Ratio
CPU Frequency
CPU Speed : 233Mhz(66*3.5)
CPU Ratio : x 3.5
CPU Frequency : 66 MHz
Boot Sequence : A, C, SCSI
Quick Power On Self Test
POWER ON Function : BUTTON ONLY
KB Power ON Password : Enter
: 233Mhz(66*3.5)
Hot Key Power ON : Ctrl-F1
Soft-Off by PWR-BTTN : Instant-Off
: x 3.5
Power-On by Ring/LAN : Enabled
Power-On by Alarm : Disabled
: 66 MHz
28
ROM PCI/ISA BIOS
SOYO COMBO SETUP
AWARD SOFTWARE, INC.
: Enabled
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
SY-6IEB
↑ ↓ → ←
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color