Table of Contents
Advertisement
BIOS Setup Utility
3-8.5 Onboard Parallel Ports
Onboard Parallel
Ports
Onboard Parallel
Port
Parallel Port Mode
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use DMA
3-8.6 MULTI I/O ADDRESSES
Default settings for multi-I/O addresses are as follows:
Port
LPT1
COM1
COM2
Warning: If a default I/O address conflicts with other I/O
cards such as sound card, you must change one of the I/O
addresses to remedy to this address conflict. (I/O addresses
can be adjusted from the BIOS Setup Utility)
Setting
378/IRQ7
3BC/IRQ7
278/IRQ5
Disabled
ECP/EPP
SPP
ECP
EPP
3
1
I/O Address
378H
3F8H
2F8H
60
Description
Choose the printer I/O
address.
The mode depends on
your external parallel
device that connects to
this port.
Choose DMA3
Choose DMA1
IRQ
7
4
3
SY-6IEB
Note
Default
Default
Default
Status
SPP
Advertisement
Table of Contents
Need help?
Do you have a question about the SY-6IEB and is the answer not in the manual?