Advertisement
BRILLION ELITE MINI MONITOR
Settings Menu -
Shaft Settings
Seed Shaft Settings
4620-24 Folding Seeder can have up to six Smart Shaft
Sensors that indicate shaft rotation. Each Smart Shaft
Sensor must be set.
•
Pulse per Rev: 1
•
Alarm Time: 20 Sec.
Toggle between each "Shaft" by pressing icon "<" or ">".
Select "Back" to get to the Settings Menu.
The 20 second Alarm Time is the estimated time it takes
to turn around after each pass in the field without
sounding the Alarm. This can be adjusted by the operator
if more or less time is required before the Alarm Sounds.
SHAFT SETTINGS
SHAFT 1
PULSE PER
REV:
1
ALARM TIME
20 SEC.
Ground Speed
4620-24 Folding Seeder has one Smart Shaft Sensor
located on the Left Seeder Unit Clutch Shaft that indicates
ground speed. The Smart Shaft Sensor/Ground Speed
must be set.
•
Pulse per Rev: 4
•
Alarm Time: 20 Sec.
Toggle between each "Shaft" by pressing icon "<" or ">".
Select "Back" to get to the Settings Menu.
SHAFT SETTINGS
SHAFT 1
PULSE PER
REV:
4
ALARM TIME
20 SEC.
4-6
TABLE OF CONTENTS
Settings Menu -
GPS
SHAFT
Diagnostics
RECEIVER
SETTINGS
The Diagnostics screen can help in identifying issues with
sensors, harnessing or other items. Status reports for
Battery Voltage, Sensors Learned, MUX Communication
speed and GPS Communication speed are displayed.
Contact Loup Electronics if you need technical support.
DIAGNOSTICS
BATTERY VOLTAGE:
FIN_1:
H_AI_1:
H_AI_2:
BACK
BACK
13.71 V
0 Hz
OPEN
L_DI_1:
OPEN
H_DI_1:
0.17 V
CURR_1:
0.0 mA0.0 PSI
0.02 V
CURR_2:
0.0 mA0.0 PSI
DIAGNOSTICS
BACK
MUX: PASS
0
#MUX LEARNED:
TEST EXTERNAL
SD: STATUS
NOR: STATUS
F-886-0322
Advertisement
