Advertisement
OPERATION
Coil Tine Harrow
The Seeder has a Standard Coil Tine Harrow to remove
tire tracks before the rollers compact the soil. The coils
are individually mounted for flexibility and backup
protection. The Tines depth should be adjusted so the
tips are approximately 2" into the soil.
NOTE
The tines will hang straight down when the implement is
raised.
1. The Coil Tine may be adjusted up or down as needed.
2. Adjust the Coil Tine Harrow depth by removing the
3/8-16 x 1-1/4 Bolts and Locknuts and moving the
Harrow Assembly up or down to achieve the desired
depth. (The holes are 1-1/4 inches apart)
Re-Insert 3/8-16 x 1-1/4 Bolts and secure with
Locknuts. Both sides should be set at the same depth.
See Figure 3-15.
Bolt,
3/8-16 x 1-1/4
Figure 3-15: Coil Tine Harrow Adjustment
3-12
TABLE OF CONTENTS
Locknut,3/8-16
F-886-0322
Advertisement
