Advertisement
ASSEMBLY
Coil Tine Harrow Installation
1. Attach the Harrow Mounts to the frame using 5/8-11
U-Bolts and Locknuts. See Figure 2-14.
2. Insert the Harrow Assembly into the Harrow Mount.
Align the holes and insert 3/8-16 x 1-1/4 Bolts.
3. Start by using the top holes in the Harrow Mount.
Adjust as needed. Ensure it's equally spaced from
side to side.
4. Repeat for the other side.
U-Bolt,5/8-11
Locknut,
Flange 5/8-11
Locknut,3/8-16
Harrow Assembly
203794
2-14
TABLE OF CONTENTS
Harrow Mount
Bolt,
3/8-16 x 1-1/4
3/8-16 x 1-1/4
Figure 2-14: Coil Tine Harrow
Do not work on or under this machine unless
securely blocked and supported by a hoist or
tractor or by other sufficient means.
Harrow
Assembly
203791
Locknut,
3/8-16
Bolt,
CAUTION
Locknut,
3/8-16 x 1-1/4
4620-24 TrackRemo
Locknut,
3/8-16
F-886-0322
3/8-16
Bolt,
Advertisement
