Power Supply / Power Over Ethernet (Poe) - Photon Focus Luxima MV4-D1280-L01-G2 User Manual

14.4 Power Supply / Power Over Ethernet (PoE)

When the camera is powered via wall adapter it requires a single voltage input (see Table 3.4).
The camera meets all performance specifications using standard switching power supplies,
although well-regulated linear power supplies provide optimum performance.
It is extremely important that you apply the appropriate voltages to your camera.
Incorrect voltages will damage the camera.
When using wall adapter, an input voltage of 12V has a better efficiency in the
internal power supply heat generation instead of supplying 24V.
For further details including the pinout please refer to Appendix Appendix A.
The GigE and 10GigE copper cameras can also be powerd over ethernet (PoE).
PoE is compliant according to IEEE 802.3bt standard Class 4: (25.5 W). Maximum working
voltage according to Standard: 57V at PD side.
Suitable PoE injector can be ordered from your Photonfocus dealership.
.
MAN085 04/2021 V1.3
14.4 Power Supply / Power Over Ethernet (PoE)
103 of 151