Pinouts
A.1 Power Supply Connector
The power supply plugs are available from Fischer connectors at www.fischerconnectors.com.
Fig. A.1 shows the power supply plug from the solder side. The pin assignment of the power
supply plug is given in Table A.1.
The receptacle used on the camera is Fischer DBPLU1031Z012–130G. Suitable plugs must be of
size 1031, female, configuration 012. Example: Fischer S1031Z012-130.
It is extremely important that you apply the appropriate voltages to your camera.
Incorrect voltages will damage or destroy the camera.
Figure A.1: Power supply plug, 12-pole Fischer (rear view of plug)
MAN076 09/2017 V1.0
A
109 of 121