Cleaning of the housing
To clean the surface of the camera housing:
•
Before cleaning disconnect the camera from camera power supply and I/O
connectors.
•
Do not use aggressive solvents or thinners which can damage the surface,
the serial number label and electronic parts.
•
Avoid the generation of ESD during cleaning.
•
Take only a small amount of detergent to clean the camera body. Keep in
mind that the camera body complies to the IP40 standard.
•
Make sure the detergent has evaporated after cleaning before reconnect-
ing the camera to the power supply.
Cooling
For long life and high accuracy operation, we highly recommend to mount the
camera thermally coupled, so that the mounting acts as a heat sink.
MAN085 04/2021 V1.3
13.1 IMPORTANT NOTICE!
97 of 151