Technical Data; Switching On/Off - Meec tools Multi Series Operating Instructions Manual

Service
• The power tool must only be serviced by qualified personnel
using identical spare parts. This will ensure that the power
tool remains safe to use.
Special safety regulations for reciprocating saw
• Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal parts of
the power tool "live" and could give the operator an electric
shock.
Symbols
Description of symbols used on the product. Familiarise yourself
with them to reduce the risk of personal injury and material
damage.
Read the instructions before use.
Wear safety glasses and ear protection.
Wear a dust filter mask.
The product complies with the relevant EU
directives, and an evaluation method to verify
compliance with these directives has been applied.
WEEE symbol. End-of-life electrical products must
not be discarded with household waste. Recycle
where possible. Check with local authorities or
your local store for information on recycling.

TECHNICAL DATA

Rated voltage
Output
Stroke rate (no load)
Stroke length
Max cutting capacity in wood
Sound pressure level, LpA
Sound power level, LwA
Vibration*, a h,B
Vibration**, a h,WB
Weight
* Sawing in fibreboard. ** Sawing in solid wood.
Wear ear protection.
18 V DC
710 W
3000 rpm
28 mm
100 mm
84.8 dB(A), K=3 dB
95.8 dB(A), K=3 dB
20.40 m/s², K=1.5 m/s²
20.59 m/s², K=1.5 m/s²
2.13 kg
The declared vibration value and noise, which have been
measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary
assessment of exposure. The measurement values have been
determined in accordance with EN ISO 3744, EN ISO 11203,
EN ISO 5349-1, EN ISO 5349-2.
WARNING!
The actual vibration and noise level when using power tools
may differ from the specified maximum value, depending on
how the tool is used and the material. It is therefore necessary
to determine which safety precautions are required to protect
the user, based on an estimate of exposure in actual operating
conditions (taking into account all stages of the work cycle, e.g.
the time when the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
FIG. 1
1. Saw blade fixture
2. Orbital function (I/0)
3. Start inhibitor
4. Power switch On/Off
5. Battery compartment
6. Shoe
7. Saw blade
USE
Intended use
The reciprocating saw is a hand-held power tool with a tensioned
saw blade that by virtue of its movement back and forwards saws
through different materials. Sharp curves and wavy lines can be
sawn in thin sheets or boards. The reciprocating saw can be used
to saw in wood, metal, plastic and other similar materials with
the specified dimensions. Only use the designated saw blades.
Non-intended use
The reciprocating saw must not be used for the following:
– Sawing firewood.
– Sawing material containing asbestos or other
harmful materials.
– As a portable or stationary machine.
The user is personally responsible for any material damage or
personal injury resulting from the incorrect use of the power tool.
The manufacturer's warranty will be invalidated if original spare
parts are not used on the power tool.
SWITCHING ON / OFF
1. Start the reciprocating saw by first pressing in the start
inhibitor and then the power switch.
EN
15