Cutting The Buttonhole Open With The Seam Ripper; Cutting Open Buttonholes With The Buttonhole Cutter (Optional Accessory); Sewing On Buttons - Bernina COLLEGE 455 User Manual

9.13 Cutting the buttonhole open with the seam ripper

> Place a pin in each end of the buttonhole to avoid accidental cutting into ends of buttonhole.
> Cut the buttonhole from both ends to the middle.
9.14 Cutting open buttonholes with the buttonhole cutter (optional
accessory)
> Place the fabric on an appropriate piece of wood.
> Position the cutter in the center of the buttonhole.
> Press down on the cutter with your hand.

9.15 Sewing on buttons

The button sew-on program can be used to sew on buttons with two or four holes, press studs or snap
fasteners.
Recommended sewing
program:
Recommended presser foot :
Alternative presser feet:
Button sewing-on program No. 60
Button-sew-on foot No. 18 (optional accessory)
• Reverse pattern foot No. 1 or 1C
• Darning foot No. 9 (optional accessory)
• Reverse pattern foot No. 34 or 34C (optional accessory)
Buttonholes
95