Table of Contents
Advertisement
> Touch the icon «Scroll down» so that step 6 appears.
– The machine sews the bottom bartack and stops automatically.
> Touch the icon «Scroll down» so that step 7 appears.
–
The machine secures and stops automatically.
9.13 Sewing the manual 5-step buttonhole with the Buttonhole foot No.
3C (optional accessory)
The length of the buttonhole is determined manually when sewing. Bartack, eye and securing stitches are
preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by touching
the button «Quick Reverse».
Prerequisite:
•
The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 54.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
– Step 1 the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– Step 2 is activated.
> Stop sewing at the desired length of the bead or at the marking.
> Touch the icon «Scroll down» so that step 3 appears.
> The machine sews the eye or the keyhole and stops automatically.
> Touch the icon «Scroll down» so that step 4 appears.
– The machine sews the second bead in reverse.
> Stop the machine at the first stitch where the buttonhole starts.
> Touch the icon «Scroll down» so that step 5 appears.
–
The machine sews the upper bartack and secures automatically.
9.14 Cutting the buttonhole open with the seam ripper
> Place a pin in each end of the buttonhole to avoid accidental cutting into ends of buttonhole.
Buttonholes
111
Advertisement
Table of Contents
