Using A Different Print Size - Kyocera FS-720 User Manual

Using a Different Print Size

This section describes how to print documents of different sizes than the original document.
The document image is automatically adjusted to match the output page size.
1.
In the Properties dialog box, click the Media tab.
2.
In the Page Size drop-down list, select the original paper size. Click the Print Size drop-
down list and select the preferred output paper size.
3.
Confirm that the proper paper size is loaded. Click OK to return to the Print dialog box.
4.
Click OK to start printing.
The proportion of the source document page size is compared to the output paper size by
using the Page Size feature.
Scaling enables you to select a percentage to increase or decrease the original image
relative to the original page size. Refer to
Select Same as Page Size in the Print Size list to restore the output page size.
Scaling on page 43.
41
Printing from Applications