Printing And Saving Temporary And Permanent Jobs - Kyocera FS-720 User Manual

Printing and Saving Temporary and Permanent Jobs

Check that your printer has an optional hard disk installed. For further details on hard disk
settings, refer to RAM Disk Settings
1.
From the application's Print dialog box, access the Properties. (Select Print from the
File menu).
2.
Open the Properties dialog box, and click the Output tab.
3.
Click Job Settings... to access the Job Settings dialog box.
4.
Select the Job Storage (e-MPS) check box. Select Temporary or Permanent.
5.
When printing a job with a job ID barcode, open the Barcode Option dialog box and
make the appropriate settings.
For further details, refer to
Jobs on page 125.
Click OK to return to the Print dialog box. While printing, the job will be simultaneously saved
on the hard disk as either a temporary or permanent job.
To reprint temporary or permanent jobs, the dedicated KM-NET Job Manager utility is
required. For further details, refer to
on page 123.
on page 20.
Using the Barcode Reader to Print Additional Copies of Saved
Using KM-NET for Clients to Print Saved Jobs Again
122