Color Mode - Kyocera FS-720 User Manual

Adjusting Color You can adjust attributes of text and graphics for your color printouts.

Color Mode

You can switch between printing in Color (CMYK) and Monochrome modes. Specifying
Custom mode allows you to select the desired effects including Gray Component
Replacement, Continuous Tone, Gloss Mode, and Monochrome. Refer to Color Mode
Definitions table below.
1.
From the Print dialog box of the application, access the printer Properties. Select
Properties in the Print dialog box opened from the File menu.
2.
In the Properties dialog box, click the Color tab.
3.
Click the Color Mode drop-down list, and make a selection. For further details, refer to
the table below.
Color Mode Settings
Options
Color (CMYK)
Monochrome
Custom
Descriptions
Uses the four toner colors to print text and graphics in full color.
Uses only the black toner for black-and-white printing.
Opens the Color Mode Settings dialog box. You can adjust the
settings for gray component replacement, continuous tone, glossy
mode, and monochrome mode. For further details, refer to Color
Mode Definitions.
72