Kyocera FS-720 User Manual page 9

method you are able to choose which software packages to install. If you wish to use the
Custom method, see Custom Installation
The installation program installs the software.
During installation, if your printer is not connected and powered on, you will see a reminder to
connect the printer to your computer. Once the printer is connected and the power is on, the
Found New Hardware Wizard displays. If the Found New Hardware Wizard does not
display, reconnect the USB cable between your computer and printer.
In Windows 98 this reminder will display regardless of whether or not your printer is correctly
connected. The Hardware Wizard will display when the printer is properly connected.
Installing the Printer Driver in Windows
on page 9
3