Printing Private Print Jobs - Kyocera FS-720 User Manual

Printing Private Print Jobs

The actual key operation may differ depending on the printer model.
1.
On the printer operation panel, press the MENU key.
2.
Press the or key repeatedly until e-MPS > appears.
3.
Press the key to access the submenu.
4.
Press the or key repeatedly until >Private/Stored appears.
5.
Press the ENTER key, the user name displays with a blinking question mark [ ? ].
6.
If the user name is correct, press the ENTER key. Otherwise, press the
the correct name is displayed.
7.
The job name is displayed with a blinking question mark [ ? ]. Press the ENTER key.
8.
The user name displayed is specified following the instructions in the
page 22. If this is the correct job for printing, press the ENTER key.
Otherwise, press the
ENTER key.
9.
Enter the four-digit access code created in
10.
Press the or key to increase or decrease the number.
11.
Press the or key to move the cursor right and left.
12.
Press the ENTER key. Use the
13.
Press the ENTER key to start printing.
After printing, the job will be automatically deleted from the hard disk. To delete the job
without printing it, follow the same procedure as in
108.
or key until the correct job name appears, then press the
Private Print
or key to specify the number of copies for printing.
111
Useful Functions
or
Identification
on page 110.
Deleting Quick Copy Jobs
key until
on
on page