Use Specific User Id - Kyocera FS-720 User Manual

User Login (FS-
1118MFP / KM-1820
only)
2.
The Enter Password dialog box appears. Enter the password and click OK.
3.
The Administrator Settings dialog box appears. Disable the Lock these Settings check box.
A Password dialog box appears. Click OK.
Refer to Setting the Administrator Password
When User Login is set to ON at the printing system, User Login allows you to limit printing
privileges to specified users, which is useful for secure printing and job accounting. This
feature allows for job accounting by user, which differs from the method by division or
department in the Job Accounting feature.
A maximum of 20 User IDs and passwords can be registered at the printing system, and 100
User IDs and passwords can be stored in the printer driver for use with multiple printing
systems. Once User IDs are assigned, you can type the User ID and password. Both User ID
and password must be numbers, up to 16 digits.
The User Login password is different from the Administrator's password used for Lock these
Settings.

Use Specific User ID

Allows you to establish a User ID and password for User Login purposes. The User ID and
password must be registered in the printing system. Using this option gives the Administrator
control over the use of User IDs.
on page 27 to enter a new password.
29
Printer Properties