Identification - Kyocera FS-720 User Manual

User Settings
The Auto Configure tool can not communicate with a printer if the printer is powered off or in
the middle of booting up process. In such cases, Auto Configure will display the following
message after the time out.
The following user information can be configured by clicking the User... button on the Device
Settings tab.

• Identification

• Unit of Measurement
• Language Preference Selection
Identification
You can display the user information for the current print job on the printer operator panel. For
further details, refer to Job Name Display
1.
On the Device Settings tab, click User....
2.
The User Settings dialog box appears. In the User Name and Department fields, enter
up to 31 characters.
• Enter the preferred name in User Name field.
on page 26.
22