Kyocera FS-720 User Manual page 27

Auto Configuration
The Kyocera Auto Configuration Tool (KACT) allows users to automatically configure the
physical device settings of a printer on the Device Settings properties page. Auto Configure
can detect printer devices such as input devices, output devices, RAM disk size, and hard
disk size. Then it sets the Device Options list on the Device Settings properties page. Auto
Configure keeps the printer driver's Device settings consistent with the actual printer devices.
Auto Configure currently supported these ports for Windows operating systems:
• Windows 98 & ME – KPrint ports (Raw mode, LPR, and IPP) only
• Windows NT 4.0 – KPrint ports (Raw mode, LPR, and IPP) only
• Windows 2000 – TCP/IP Ports and KPrint Ports (Raw mode, LPR, and IPP)
• Windows XP – TCP/IP Ports only
TCP/IP port can be either an IP address or the printer name (Host name).
Windows 95 is not supported by KACT.
1.
Click Auto Configure.
An "in progress" message will display.
The checkbox settings on the Device Options: list will be changed and the 3D image will be
updated according to the device options installed. Memory and RAM Disk information will
also change by the settings information returned. When completed, this message will display:
21
Printer Properties