Ram Disk Settings - Kyocera FS-720 User Manual

• The following functions can be used if a hard disk is installed:
• Quick Copy
• Proof and Hold
• Private Print
• Job Storage
• Temporary
• Permanent Jobs

RAM Disk Settings

The RAM disk functions as a hard disk saving print requests into the printer's memory if a
hard disk for printing is not installed. When a hard disk is installed, the RAM disk function is
inactive.
Since the RAM disk is volatile memory, all data sent to the printer is lost if the power is turned
off.
The size of the RAM disk is specified in settings on the printer operator panel. For further
details, consult the printer's Operation Guide.
1.
In the Device Options list, enable the RAM Disk check box. The memory capacity can
be adjusted in the RAM Disk combo box.
2.
Specify the RAM Disk size. The maximum RAM disk capacity may vary depending on
your printer model and installed memory.
In the example of the FS-6020 shown above, if the memory corresponds to 16 MB minus
8 MB, the maximum available capacity for the RAM disk is 8 MB. The value in the combo box
will not exceed 8 MB. For further details, consult the printer's Operation Guide.
20