Vector Line Dither Pattern; Clip To Image Size - Kyocera TASKalfa 2420w Operation Manual

Line Width Compensation Default 0.0

Vector Line Dither Pattern

Users have 2 choices of vector line dither
patterns. This will alter the appearance of
vector grayscale in different ways. Fine is the
default setting. There is no 'correct' pattern
to choose. Users can choose the setting
they prefer.

Clip to Image Size

This crops the file data to the start of image data. Apply when the file designer has saved the entire
drawing area as part of the file. If an error "File Too Large To Print," occurs, clipping to Image Size is
often the solution.
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
Request Operators Guide
Line Width Compensation set to +2.0
2011.
- 27 -