Of Copies; Collate; Cut Sheet; Advanced Job Settings - Kyocera TASKalfa 2420w Operation Manual

# of Copies

This field chooses the total number copies from 1 to 999.

Collate

This field allows collated or uncollated prints.
111, 222, 333... or 123, 123, 123...

Cut Sheet

When activated in the Request.ini file this feature allows the user to print
directly to the cut sheet bypass. Only one sheet at a time may be printed and
force size setting MUST be selected in order to print.
If a force size setting is not selected the following message will be displayed.

Advanced Job Settings

On the left side of the main Request screen are buttons to allow advanced settings and configuration
of the prints.
These buttons are:
Manage
Pen Configuration
Zoom
Rotation
Stamp
Fold
Header
Mirror
Invert
View
2-Up Printing
This information is solely for use of Personnel and Authorized Dealers. No part of this publication may be copied, reproduced or
distributed in any form without express written permission from.
Request Operators Guide
2011.
- 23 -
a