Connecting With Synchronous Feed Encoder/Manual Pulse Generator - Mitsubishi Electric CNC 700 Series Connection Manual

6. Connections of Control Unit

6.11 Connecting with Synchronous Feed Encoder/Manual Pulse Generator

Synchronous feed encoder (1ch) or 5V power supply type manual pulse generator (2ch) can be connected.
MITSUBISHI
ENC
<Related items>
Cable drawing: "Appendix 2 (FCUA-R050/R054 Cable, G023/G024)"
Connector pin assignment: "Appendix 3 (ENC connector)"
Refer to the section "7.6.2 Connecting with 5V Manual Pulse Generator" for 5V manual pulse generator's
input conditions and input/output circuit example.
When using synchronous feed encoder and manual pulse generator at the same time, the cables must be
prepared by the machine tool builder.
6.11 Connecting with Synchronous Feed Encoder/Manual Pulse Generator
When connecting one 5V
manual pulse generator
When connecting two 5V
manual pulse generators
Synchronous feed encoder
OSE1024-3-15-68
R054 cable
R050 cable
5V manual pulse generator
G023 cable
NO.2
5V 0V A B
G024 cable
5V manual pulse generator
72
(Rear view)
NO.1
5V 0V A B
NO.1
5V 0V A B
(Rear view)