Fcu7-Da315-11 / Fcu7-Da415-11 / Fcu7-Da445-11; (Connections Of Pd25/Pd27 Power Supply Unit) - Mitsubishi Electric CNC 700 Series Connection Manual

9. Connections of Display Unit
9.2.3 FCU7-DA315-11 / FCU7-DA415-11 / FCU7-DA445-11 (Connections of PD25/PD27 power
supply unit)
(1) Connections of PD25/PD27 power supply
Display unit
(Rear view)
CF01
CF24
DCIN
CF24
CF01
DCIN
(Note) PD25/PD27 cannot be turned ON immediately after it is turned OFF. Wait at least 2 seconds, and
then turn the power ON.
<Related items>
Cable drawing: "Appendix 2 (F110 cable, G170 cable, G171 cable)"
Connector pin assignment: "Appendix 3 (DCIN connector, CF01 connector, CF24 connector,
(2) Specifications of PD25/PD27 power supply
Refer to the section "6.2.2 When Using PD25/PD27 Power Supply Unit" for details on PD25/PD27.
CAUTION
Do not apply voltages to the connectors other than voltages indicated in this manual. Failure to observe this could
cause the devices to rupture or damage, etc.
Incorrect connections could cause the devices to damage. Connect the cable to the designated connector.
Do not connect or disconnect the connection cables between each unit while the power is ON.
ON/OFF
PD25/PD27
power supply unit
G171 cable
F110 cable
ON/OFF connector)"
146
9.2 Connecting with Power Supply
G170 cable
MC
ACIN
ON/OFF SW
ON/OFF
FAN ALARM
POWER
DCOUT
LGON
ON
OFF
LGOFF
Faston terminal#110
for ON/OFF switch
NFB
R
S
T
FG