Mitsubishi Electric CNC 700 Series Connection Manual page 237

Appendix 4. Servo/Spindle Cable and Connector Specifications (MDS-D/DH)
(2) For wiring between drive units (outside panel)
Optical communication connector
Manufacturer: Tyco Electronics AMP
<Type>
Connector: 1123445-1
Cable appearance
<Type>
Connector: 1123445-1
(Tyco Electronics AMP)
Optical fiber: ESKA Premium
(MITSUBISHI RAYON)
(Note 1) The PCF fiber's light amount will drop depending on how the fibers are wound. So, try to avoid wiring the fibers.
(Note 2) Do not wire the optical fiber cable to moving sections.
4.4 Connector Outline Dimension Drawings
22.7
218
[Unit: mm]