Sliding The Projector On The Support; What Has To Be Done; Necessary Tools - Barco R9828870 Instruction Manual

Sliding the projector on the support

What has to be Before sliding the projector on the support, insert on each corner of the support an
done adjustable unit (see also adjusting the projector level).

Necessary Tools

Spanner 18mm
Sliding the To slide the projector on the support, follow the next procedure:
projector on the
support
Step
1-
2-
3-
BARCO ——————————————————— 14
Action
Fit on each corner of the support and adjustable unit (A) before sliding the
projector on the support.
Slide the projector on the support, as illustrated in drawing below, until the lock
screws (B) fits the provided gap (C).
Secure the position of the projector on the support by tightening a nut (D) on
both lock screws.
B
A
D
————————————— Projection Systems
A