Fixing The Pull Belts On The Projector Support; What Has To Be Done; Necessary Tools; Fixating The Pull Belts - Barco R9828870 Instruction Manual

Fixing the pull belts on the projector support

What has to be After the projector is slided onto the projector support, proceed to fixing the pull belts of
done the motor unit on the projector support.

Necessary Tools

Spanner 18mm
Fixating the pull To fix the pull belts of the motor unit on the projector support, follow the next procedure:
belts
Step
1-
2-
3-
4-
BARCO ——————————————————— 13
Action
Place the projector, slided on the support, (A) under the mounted motor unit (B).
Unroll the belts (C) via ‘let down’ motor operation until the top of the belt reaches
the projector support.
The ends of the belts are already provided with a locked loop. Line up each
loop with the respective bracket on the support. Open the loop, insert a bolt
M12 (D) through the bracket and loop, and secure with a nut M12 (E).
Put a nut M12 (F) on each rod, a few centimeter from the top (used later for
securing the projector support).
D
E
B
C
A
————————————— Projection Systems
F