Insertion Of The Four Rods In The Ceiling Plate; What Has To Be Done; Necessary Tools; Mounting The Rods - Barco R9828870 Instruction Manual

Insertion of the four Rods in the Ceiling PLate

What has to be After the rods are sawed on the right lenght, insert the four rods in the respective nut
done on the mounted ceiling plate.

Necessary Tools

Spanner 18mm
Mounting the To insert the rods in the provided nut on the ceiling plate, follow the next procedure:
rods
Step
1-
2-
3-
BARCO ——————————————————— 11
Action
Put a nut M12 (A) on each rod (B) (to be used later to lock the inserted rod)
Insert the four rods fully in the respective welded nut (C) on the ceiling plate
Lock the position of the rods by tightening the provided nut (C) against the
ceiling plate.
B
A
C
————————————— Projection Systems
C