Set Up With Vegadis 82; Principle Of Operation And Connection; Adjustment Volume - Vega VEGAWELL 52 Operating Instructions Manual

VEGAWELL 52 • 4 ... 20 mA/HART Pt 100
6

Set up with VEGADIS 82

6.1

Principle of operation and connection

The VEGADIS 82 is an external display and adjustment unit without
additional voltage supply.
The instrument is suitable for measured value indication and adjust-
ment of sensors with HART protocol. It can be connected at any
point to the 4 ... 20 mA signal cable. A separate voltage supply is not
required.
1
Fig. 15: Connection of the VEGADIS 82 to the sensor, adjustment via the dis-
play and adjustment module
1 Sensor
2 VEGADIS 82
3 Voltage supply/Signal output
6.2

Adjustment volume

Main menu: Basic adjustment, Diagnosis, Service, Info
Basic adjustment: Settings, for example on position correction,
adjustment, damping
Diagnosis: Information, for example, on device status, peak indicator
Service: Reset
Info: Indication of instrument type and serial number
6 Set up with VEGADIS 82
=
~
2 3
21