6 Set up with VEGADIS 82
20
6
Set up with VEGADIS 82
6.1
Principle of operation and connection
The VEGADIS 82 is an external display and adjustment unit without
additional external energy.
The instrument is suitable for measured value indication and adjust-
ment of sensors with HART protocol. It can be connected at any point
to the 4 ... 20 mA signal cable. A separate external energy is not
required.
1
Fig. 14: Connection of the VEGADIS 82 to the sensor, adjustment via the dis-
play and adjustment module
1
Sensor
2
VEGADIS 82
3
Voltage supply/Signal output
6.2
Adjustment volume
Main menu: Basic adjustment, Diagnosis, Service, Info
Basic adjustment: Settings, for example on position correction,
adjustment, damping
Diagnosis: Information, for example, on device status and peak value
Service: Reset
Info: Indication of instrument type and serial number
=
~
2
3
VEGAWELL 52 • 4 ... 20 mA/HART