Auxiliary Rs232 Interface Connections - Datalogic DP1100 Series Installation Manual

DP1100
To select this interface type, follow the instructions in paragraph 2.3.1 "Main
Serial Interface Selection".
2.7

AUXILIARY RS232 INTERFACE CONNECTIONS

The auxiliary serial interface is used exclusively for RS232 point to point
connections.
The parameters relative to the auxiliary interface (baud rate, data bits, etc.)
as well as particular operating modes such as local echo can be defined
using the Winhost utility program or Keyboard Mode programming or Host
Mode programming. For more details refer to the section "Auxiliary Interface
Menu" in the Help On Line of the Winhost utility program.
2.18 - Installation
DP1100
C.L. OUT+
9
8 C.L. OUT-
C.L. IN+
7
C.L. IN-
6
MAXIMUM LENGTH: 300 m
Figure 2.20 - 20 mA C.L. passive connections
USER INTERFACE
+
+
DATALOGIC