Description - Datalogic DP1100 Series Installation Manual

DP1100
The following models are therefore available:
Number of scan heads
1 = 1 scan head (H1)
2 = 2 scan heads (H2)
To simplify descriptions in this manual, hereon the designations H1 and H2
will be used to indicate 1 scan head and 2 scan head models respectively.
1.3

DESCRIPTION

Some of the main features of this decoder are given below:
• completely configurable from host computer
• 3 output signals (open collector, open emitter)
• 2 serial communication interfaces
• reads all popular codes
• connection to two scan heads (H2 models only)
• connections to a PLC using Siemens protocols
• configurable in different operating modes to suit the most various barcode
reading system requirements
• test mode to verify the reading features and exact positioning of the
scanner without the need of external tools
• code verifier
• PCS (H1 models only)
Optional boards can be mounted to increase the number of communication
interfaces. For more details refer to your local Datalogic distributor.
IP65 protection class can be obtained to make DP1100 particularly suitable
for industrial environments where high protection against harsh external
conditions is required. For more details refer to your local Datalogic
distributor.
1.2 - General features
DP1100 - X X 0 0
Supply voltage
1 = 110 VAC
2 = 230 VAC
DATALOGIC