Eeprom Map Information; Magnetics Modules For 82547Gi(Ei) Controller Applications; Power Supplies For The 82547Gi(Ei) Device; 82547Gi(Ei) Eeprom Memory Layout - Intel 82562EZ Design Manual

3.3.3

EEPROM Map Information

Table 12 summarizes the EEPROM map for the 82547GI(EI) Gigabit Ethernet Controller.
Table 12. 82547GI(EI) EEPROM Memory Layout
00h
3Fh
40h
FFh
100h
19F
1A0
...
EEPROM END
Note: Full manageability provided.
3.3.4

Magnetics Modules for 82547GI(EI) Controller Applications

Carefully select a Gigabit magnetics module for your design.
magnetics modules for use with the 82547GI(EI) device. These modules also contain integrated
USB jacks. A good quality Gigabit Ethernet controller can also be used with the 82562EZ(EX)
PLC device.
Note: These components are pin-compatible with the magnetics modules shown in
82562EZ(EX) Platform LAN Connect device.
Table 13. 82547GI(EI) Recommended Magnetics Modules
Pulse
Others
3.3.5

Power Supplies for the 82547GI(EI) Device

The 82547GI(EI) controller requires three power supplies. The 1.2 V supply must provide
approximately 550 mA current. The 1.8 V supply must provide approximately 230 mA current.
The 3.3 V supply must provide only 5 mA current.
A central power supply can provide all the required voltage sources, or the power can be derived
and regulated locally near the Ethernet control circuitry. Keep in mind that all voltage sources must
remain present during powerdown in order to use the 82547GI(EI) Ethernet controller's LAN wake
up capability. This consideration makes it more likely that at least some of the voltage sources will
be local.
82562EZ(EX)/82547GI(EI) Dual Footprint Design Guide
HW/SW Reserved Area
ASF and Legacy
Manageability
Manageability
Packet Filter Data
Loadable
Manageability Firmware
Code
Manufacturer
Table 13 lists suggested integrated
Table 9 for the
Manufacturer's Part Number
JW0A2P019D
TBD
17