Song Editing - Korg M50-73 Owner's Manual

Creating songs (Sequencer mode)
Press the SEQUENCER REC/WRITE switch, and then
press the SEQUENCER START/STOP switch.
After the pre-count, pattern recording will begin. Play
the keyboard and operate the joystick and other
controllers to record your performance.
When you reach the end of the pattern, the sequencer
will return to the beginning of the pattern and continue
recording. If you continue recording, the newly
recorded data will be added to the previously-recorded
data.
9. If you want to delete specific data while you
continue pattern recording, you can press the
SEQUENCER REC/WRITE switch or check the
"Remove Data" check box.
For details refer to step 6 of "Loop All Tracks" on
page 58.
10.Press the SEQUENCER START/STOP switch to
stop recording.
If you made a mistake or decide to re-record, press the
SEQUENCER START/STOP switch to stop recording,
and press the COMPARE switch. Then begin the
pattern recording procedure again as in step 8.

Song editing

You can apply a variety of editing operations to a song.
For details, please see PG page 191.
62