Error Messages; Error And Confirmation Messages - Korg M50-73 Owner's Manual

Error messages

Error and confirmation
messages
A
Are you sure ?
Meaning: This message asks you to confirm execution.
To execute press the OK button. To cancel, press the
Cancel button.
C
Can't calibrate
Meaning: Calibration could not be performed
correctly.
• Try again.
Can't copy/swap double size effect
Meaning: When copying or swapping an insertion
effect or master effect, you attempted to place a
double-size effect in IFX5 and MFX2.
• Modify your settings so that a double-size effect is
not moved to IFX5 or MFX2, and execute again.
Can't open pattern
Meaning: When you finished recording, there was not
enough memory to open the pattern that was put into
the track (When it must be opened automatically). If
you press the OK button, the pattern data will be
deleted, and the recorded or edited content will be
saved. If you press the Cancel button, the recorded
content will be discarded.
Completed
Meaning: Execution of the command ended normally.
Completed. Please turn the power off, and then
on again
Meaning: Execution of Update System Software has
been completed successfully. Turn the power switch
off, and then on again to complete the update.
D
Destination and source are identical
Meaning: When copying or bouncing, the same song,
track or pattern was selected for both the source and
destination. To solve this problem:
• Select a different song, track, or pattern for the
source and destination.
Destination from-measure within the limits of
source
Meaning: When executing the Move Measure
command for all tracks or within the same track, the
specified destination measure is within the source
range. To solve this problem:
• Set a destination measure that is outside of the
source range.
Error messages Error and confirmation messages
Destination is empty
Meaning: When editing, the track or pattern that was
specified as the destination contains no musical data.
To solve this problem:
• Select a track or pattern that contains musical data.
Destination measure is empty
Meaning: The measure that was specified as the
destination contains no data.
• Specify a destination measure that contains data.
Destination song is empty
Meaning: The song that was specified as the copy
destination or bounce destination does not exist.
• Execute the Create New Song command in the
dialog box that appears when a new song is
selected before copying or bouncing.
Directory is not empty
Meaning: When deleting a directory, files or
directories exist within that directory.
• Press the OK button to delete all files and/or
directories within that directory.
Disk not formatted
Continue?
Meaning: When you attempted to perform a high-
level format (quick format) of media, the media had
not been physically formatted yet. To solve this
problem:
• Execute the Media mode Utility menu command
Format to physically format the media (full format).
E
Error in formatting medium
Meaning: An error occurred while performing a
physical format (full format) or high-level format
(quick format) of the media. To solve this problem:
• Use other media.
Error in reading from medium
Meaning: An error occurred while reading data from
media. This error may also appear when data is being
written to media by a Save or Copy operation. To solve
this problem:
• Execute the reading operation once again. If the
same error occurs, it is possible that the data on the
media has been damaged.
Error in writing to medium
Meaning: A verification error occurred while writing
data to a medium. To solve this problem:
• It is possible that the media has been physically
damaged. Try another media. Avoid using the
media that produced the error.
Cleanup directory
Are you sure?
103