Korg M50-73 Owner's Manual page 110

Appendices
F
File already exists
Meaning: When executing a Create Directory or File
Rename operation, a directory or file of the same name
already exists on the media.
Meaning: When executing the Media mode Utility
Copy command without using wild cards, the copy
destination contained a file of the same name as the
copy source.
• Either delete the existing directory or file, or specify
a different name.
File unavailable
Meaning: You attempted to load or open a file whose
format was incorrect.
File/path not found
Meaning: When executing the Delete command in the
Media mode Utility page, the specified file did not
exist.
Meaning: When executing the Copy command in the
Media mode Utility page, and you used a wild card to
specify the copy file name, the specified file was not
found. Alternatively, the length of the copy source path
name exceeded 76 characters.
Meaning: In Media mode when you used the Open
button to open a directory, the path length including
the selected directory name exceeded 76 characters.
• Check the file or directory.
I
Illegal file description
Meaning: The filename that you specified when saving
a file or creating a directory contained invalid
characters. To solve this problem:
• Change the filename you are specifying. Filenames
not permitted by MS-DOS cannot be used as a
filename.
Illegal SMF data
Meaning: You attempted to load a file that was not a
Standard MIDI File.
Illegal SMF division
Meaning: You attempted to load a Standard MIDI File
that was timecode-based.
Illegal SMF format
Meaning: You attempted to load a Standard MIDI File
of a format other than 0 or 1.
M
Master Track can't be recorded alone
Meaning: When realtime-recording a single track, you
attempted to begin recording with the master track as
the current track.
• Select a MIDI track for recording, instead of the
Master Track.
104
Measure number over limit
Meaning: The attempted edit operation would cause
the track length to exceed 999 measures.
• Delete unnecessary measures.
Measure size over limit
Meaning: When loading a Standard MIDI File, the
number of events in a measure exceeded the maximum
(approximately 65,535 events).
Meaning: The attempted edit operation would cause
the maximum number of events in a measure
(approximately 65,535) to be exceeded.
To solve either of these problems:
• Use event editing etc. to delete unwanted data.
Medium changed
Meaning: When executing the Copy command in the
Media mode Utility page, the media was exchanged or
ejected, and it was not possible to copy between
separate media on the same drive.
Medium unavailable
Meaning: You selected a medium that does not allow
writing.
Medium write protected
Meaning: The other writing-destination media is
write-protected.
• Turn off write protect on the other media, and
execute the command once again.
Memory full
Meaning: When editing a song, track or pattern in
Sequencer mode, the total data of all songs has used up
all of the sequence data memory, and further editing is
not possible. To solve this problem:
• Delete other song data etc. to regain free memory.
Meaning: While realtime recording in Sequencer
mode, there is no more free memory to accommodate
the recorded data, so recording has been forcibly
halted. To solve this problem:
• Delete other song data etc. to regain the amount of
free memory.
Memory overflow
Meaning: While receiving exclusive data in Media
mode Save Exclusive, all remaining internal memory
was used up. To solve this problem:
• If you are receiving two or more sets of exclusive
data, transmit them separately to the M50.
Memory Protected
Meaning: The internal program, combination, song,
drum kit, user arpeggio pattern is protected.
Meaning: The song was protected when you executed
Auto Song Setup.
• In Global mode, turn off write-protect, and execute
the write or load operation once again.
MIDI data receiving error
Meaning: While receiving MIDI System Exclusive
data, the format of the received data was invalid, for
example, because the size of the data was incorrect.