Listening To The Demo Songs - Korg M50-73 Owner's Manual

Listening to the demo songs

Loading the demo song data
1. Press the MODE GLOBAL switch (the LED will
light) to enter Global mode.
2. Access the Global P0: Basic Setup page.
If another page is displayed, press the EXIT switch.
3. Press the menu button in the upper right of the
display, and choose "Load Preload/Demo Data."
4. In the "Kind" field, choose "All (Preload PCG and
Demo Songs)."
When you execute loading, the preloaded data and the
demo song data will be loaded.
If you've edited a preloaded program or
combination, or created one from scratch,
executing this Load operation will overwrite your
data; i.e., your changes will be lost. Before loading
the Preload PCG data, save your programs on an
SD card (commercially available). (See PG
page 260)
5. Press the OK button or ENTER switch.
A dialog box will ask you for confirmation.
Press the OK button or ENTER switch once again to
load the data.
Never turn off the power while data is being
loaded.
If the Memory Protected dialog appears, press the
System Pref. tab and clear the check mark from the
Memory Protect Song setting. Then load the data
again.
Listening to the demo songs
Playing the demo songs
1. Press the MODE SEQ switch (the LED will light)
to enter Sequencer mode.
2. Access the P0: Play/REC– Program T01–08 page.
If this page is not displayed, you'll need to press the
EXIT switch a few times.
Song Select
Popup
Track Select
Category
Program Select,
& Popup
Play/Mute/Rec
Solo
Track 1
Track 2
3. Let's start by listening to song S000.
Verify that song S000 is selected. If another song is
selected, press the song name display area (Song
Select) to highlight it. Then press the numeric key 0,
and then the ENTER switch.
4. Press the SEQUENCER START/STOP switch.
The LED will blink, and the song will begin playing
back.
5. If you want to stop playback mid-way through the
song, press the START/STOP switch once again.
6. Let's listen to the next song.
Press the song name display area (Song Select). Press
the numeric key 1, and then press the ENTER switch.
(Song "S001" will be selected.)
Alternatively, you can press the round button (Song
Select popup) located to the left of the song name, and
a list of song names will appear. Press one of the song
names to select a song.
7. Press the SEQUENCER START/STOP switch to
begin playback. To stop playback, press the
START/STOP switch once again.
The demo song will not be retained when the
power is turned off, but you can load it again at
any time.
Meter Tempo
5