Loading & saving data
Refer to the owner's manual included with your
card, and observe the guidelines for handling and
How to save data
Access the Media- Save page, and select the
appropriate menu command according to the data that
you're saving to media.
For details on saving, please see "0–2: Save" on
page 260 of the Parameter Guide.
Cautions when saving
If an identically named file exists on the me-
If a ﬁle with the same name already exists on the
media, you will be asked whether you want to
overwrite. If you wish to overwrite, press the OK
button. If you want to save without overwriting, press
the Cancel button and rename the ﬁle before you save
it. For details, please see "Editing names" on page 91.
Please note when saving
• When using Save All (PCG & SNG), and Save
PCG to save combinations, you should also
remember to save the programs used by each
timbre (or the drum kits, and user arpeggio
patterns used by the programs) at the same time.
Similarly when saving programs, you should also
remember to save the drum kits, user drum track
patterns and user arpeggio patterns used by the
Time required when saving data
• The length of time required will depend on the
amount of data being saved.
Using the M50 as a data ﬁler
The M50 can receive MIDI System Exclusive data sent
by an external device, and save this data to media.
(This is sometimes referred to as the "Data Filer"
function.) For details, please see "Save Exclusive" on
page 268 of the Parameter Guide.