Vehicle Belts - Maxi-Cosi Peri 180 Manual

55

Vehicle Belts

Your vehicle's features may be considerably different
than those pictured here.
If LATCH: lower anchors are not an option or if your child weighs more
than 25 lb (11 kg), in Rear-Facing Mode
seat belt system to install the car seat.
Not all vehicle belts and seating positions will work with car
seats. Please go through the following steps to understand how
to lock a car seat in Rear-Facing Mode
1
you MUST use the vehicle
with a vehicle belt.
You MUST Review
Your Vehicle
Owner's Manual
Your vehicle owner's
manual will let you know
which vehicle belts and
seating positions car
seats can be installed in.
2
The ways this can be done are:
• By using the seat belt's retractor (see step 3); OR
• By using the seat belt's latch plate (see step 4).
3
Base Install with Vehicle Belt: Page 5
4
See the next page for some common types of
vehicle belt retractors that will work with this car
seat.
56
Check How This
Car Seat Will Be
Locked Into Place
The vehicle belt MUST
NOT loosen after
tightening.
This means there needs
to be a way to lock the
vehicle belt.
Lock Off
The vehicle belt retractor
MUST be locked after
closing the lock off.
Please go to the
vehicle belt with base
installation section of the
manual to see how to
properly use this feature.
Check Retractor
Retractors pull seat belts
into stored positions
and lock the belt to hold
passengers in place.
continued on next page