Release Lever For Vehicle Belt Lockoff & Latch: Lower Anchor Belts - Maxi-Cosi Coral XP Base Instructions Manual

Release Lever for
Vehicle Belt Lockoff &
LATCH: Lower Anchor Belts
This base has a release lever
that has two functions; one
for LATCH: Lower Anchor and
one for vehicle belts.
Lockoffs prevent the vehicle
belt from loosening after
tightening.
Opening Release Lever
Lift release lever to open
Lockoff and release LATCH:
Lower Anchor belts.
Closing Release Lever
Push down on lever to close
Lockoff and to allow the
LATCH: Lower Anchor belts to
retract.
7
For LATCH: Lower Anchor Belt with Base Install | Page 20
• You must Lift the Release Lever in
order for the LATCH: Lower Anchor
belts to loosen.
• You must Push the Release Lever
Down in order for the LATCH: Lower
Anchor belts to tighten.
For Vehicle Belt with Base Install | Page 27
• You must Lift the Release Lever in
order to thread the lap belt or the
lap/shoulder belt under both the belt
path guides and the Lockoff.
• You must tighten the vehicle belt
BEFORE Pushing the Release Lever
Down to close the Lockoff.
• The vehicle belts must be completely
under the Lockoff.
8