Vehicle Belts - Maxi-Cosi Pria Sport Manual

17
Lower Anchor Belt
Storage Attachments
To Remove Lower Anchor Belt from Storage
Attachment on Car Seat
Press the red release button on each connector, then pull the
connectors off of the storage attachments.
To Remove Lower Anchor Belt from
Vehicle's Lower Anchor Bars
Press the red release button on each
connector, then pull the connectors out
of the vehicle seat bight.
To Store Lower Anchor Belt
When using the vehicle belts to install
or when the car seat is not installed in
a vehicle, the lower anchor belt must be
properly stored.
Thread the lower anchor belt through the
Rear-Facing Belt Path
connectors to the storage attachments as
Lower Anchor Belt
shown. Gently tighten to remove slack.
Storage Attachments
Adjuster
Lower Anchor
Connectors
Lower Anchor
Belt Parts
then attach the

Vehicle Belts

Your vehicle's features may be considerably different
than those pictured here.
If LATCH: lower anchors are not an option or if your child weighs more
than 40 lb (18 kg), you must use the vehicle seat belt system to install
the car seat.
Not all vehicle belts and seating positions will work with
car seats.
Please go through the steps following steps to understand
how to lock a car seat in Rear-Facing Mode
Facing Mode with a vehicle belt.
18
Lap/Shoulder Belts
or Forward-
continued on next page