Table of Contents
Advertisement
Channel Strip Metering
1 - Expands/collapses Metering
2 - Toggles between channel strip Input or Output Metering
Bus Compressor 2 Sidebar
1 - Expands/Collapses Bus Compressor 2 Sidebar
Adding/Removing Channel Strips to the Plug-in Mixer
Plug-ins are automatically added to the Plug-in Mixer when you instantiate them in the DAW session. Deleting a plug-in in the DAW
session will remove it from the Plug-in Mixer.
Channel Strip Ordering in the Plug-in Mixer
The way in which the Plug-in Mixer works varies between DAWs. All supported DAWs allow the DAW track name to be 'pulled
through' so that the channel strip is automatically labelled, however, the way in which channel strips are ordered in the Plug-in
Mixer depends on the DAW:
DAW
Pro Tools
Logic 10.6.0 and below
LUNA
Logic 10.6.1 and above
Cubase/Nuendo
Live
Studio One
REAPER
Instantiation Time + Manual
For DAWs that fall into this category, Channel Strips are added sequentially to the
Plug-in Mixer, based on when they were inserted into the DAW session. You can re-
order channel strips in the Plug-in Mixer by clicking and dragging in the track
name area.
Automatic
For DAWs that fall into this category, the ordering of channel strips in the Plug-in Mixer
will dynamically follow the order of the tracks in your DAW session. You cannot manually
re-arrange channel strips in this mode.
SSL UC1 User Guide
Plug-in Mixer Ordering
Instantiation Time + Manual
Instantiation Time + Manual
Instantiation Time + Manual
Automatic
Automatic (must use VST3s)
Automatic (must use VST3s)
Automatic (must use VST3s)
Automatic (must use VST3s)
1
2
Position in
Plug-in Mixer
Click and drag in the Track Name area
to re-order in non-automatic DAWs
(Pro Tools, Logic 10.6.0 and below &
Product Overview & Features
1
LUNA)
27
Advertisement
Table of Contents
