Table of Contents
Advertisement
Product Overview & Features
Central Control Panel
The Central Control Panel of UC1 is used to perform a number of key functions relating to the plug-ins and the Plug-in Mixer.
3
6
4
1
11
5
12
2
7
8
9
10
1 - 7-Segment Display
Displays the position of the selected channel strip plug-in in the Plug-in Mixer.
2 - CHANNEL Encoder
Changes the selected channel strip plug-in being controlled by UC1.
3 - Channel Strip Model
Displays the channel strip model being controlled by UC1.
4 - Channel Strip Name
Displays the name of the DAW track the channel strip plug-in is inserted on in the DAW. Immediately below, a value readout is
temporarily displayed whilst a channel strip control is being adjusted.
5 - Bus Compressor Name
Displays the name of the DAW track the Bus Compressor 2 plug-in is inserted on in the DAW. Immediately below, a value readout
is temporarily displayed whilst a Bus Compressor control is being adjusted.
6 - Secondary Encoder
By default this control changes the selected Bus Compressor but it can also be used to change the process order for channel
strip (ROUTING), select PRESETS or navigate the DAW's playhead cursor when in TRANSPORT mode (accessed by pushing
the encoder from Bus Comp mode). TRANSPORT mode requires HUI/MCU setup, detailed in this User Guide.
7 - BACK Button
From the MAIN screen, pushing the back button will take you to the EXTENDED FUNCTIONS menu for channel strips.
Otherwise, it is used to navigate back up through the PRESETS list or, when in TRANSPORT mode, this functions as the Stop
command.
8 - CONFIRM Button
When in the EXTENDED FUNCTIONS menu, can be used to confirm the parameter selection. Also used to navigate forward
through the PRESETS list or confirms preset loading. When in TRANSPORT mode, this functions as the Play command.
SSL UC1 User Guide
17
Advertisement
Table of Contents
